|
johnaarons (December 31, 1969 at 6:59 pm)
PSI is a problem... you should get a valve but the PSI is so low that you will need a special valve... I use it between the bubbler and the cell to keep the water from flowing to the cell after you turn off the engine.John AArons
johnaarons (December 31, 1969 at 6:59 pm)
I use 1/4 teaspoon per gallon of distilled water ... I am getting there... I also have updated the website... hope it looks better..John AArons
911firefight (December 31, 1969 at 6:59 pm)
Hi John. What are you doing to tell the ECU to inject less fuel because you don't need as much anymore? Also you mentioned you use "LYE". How much per liter of distilled water? Thanx.
importado2 (December 31, 1969 at 6:59 pm)
Hi john,I like to know how much (PSI) can I get from 1 liter hydrogen gas? Because I´m worried about the pressure,do I need to put the security valvule?
johnaarons (December 31, 1969 at 6:59 pm)
If you have 60 amps... you have a short or you are using tap water and electrolyte at the same time... Stop what you are doing and check everything.. do not go on .. 60 amps is to high.John AArons
brisolaslip (December 31, 1969 at 6:59 pm)
hi john,the hydrogen cell goes on to the relay with the car on,so what happen if my battery is 60 amps,dosent mater?i have only 8 plates!!because less time i have only 6 plates it heat up like crazy,now i have 2 more plates!!can you tell me what i do about this and how many inches long is your plates!thanks i love you work!!
johnaarons (December 31, 1969 at 6:59 pm)
The cell goes to a relay that is turned on when the car key is turned to the on position.. the relay than connects the cell to the battery .There are many reasons for the amps..to much electrolyte .. plates to close together.. for starter...John AArons
brisolaslip (December 31, 1969 at 6:59 pm)
hi the problem i have,at my battery is 60 amps i want to drop 15 amps what i need to do?i finish it doing every things but the question i have right now ,is how do you install the the cell?you install direct to the battery you hydrogen cell?..thankss
johnaarons (December 31, 1969 at 6:59 pm)
I am using "LYE" with distilled water.John AArons
LITINNY (December 31, 1969 at 6:59 pm)
HI john so your running about 20 & 30 amps direct from the battery.......sorry i havent been keeping up with your demos. are you using some sort of chemicals like baking soda ect. thanks |
